For Better Performance Please Use Chrome or Firefox Web Browser

Journal Papers

  1. 1.  "The Development and Application of Shear Controlled Orientation Technology",P.S.Allen, M.J.Bevis, and A. Zadhoush, Iranian J.of Polymer Sci. and Tech. Vol.4 No.1, 1995.
  2. 2. "The Influence of Impurity Particles on the Mechanical Properties of Unreinforced and Short Fibre Reinforced Thermoplastic Mouldings", A. Zadhoush and M. J. Bevis, Iranian Polymer Journal Vol. 5, No.1, 1996. 
  3. 3. "Effect of Coating Paste Formulation on the Mechanical Properties of Synthetic Leather",A. Zadhoush and G.H.Maghsoodi, , Iranian Journal of Science and Technology,Vol.11, No.1. Issue No. 39 1998. 
  4. 4. "The Influence of Plasticizer Content and Type on the Rheological Behaviour of Plastisol Used in Coated Fabrics",A. Zadhoush and M. A. Alsharif, Journal of Industrial Textiles, Vol.30, No.1, July 2000. 
  5. 5. "The Influence of " Enzymatic Hydrolysis of Cellulosic Substrates"  on the Final Quality of Coated Fabrics",A. Zadhoush, A. Khoddami and M. Aghakhani, Journal of Industrial Textiles, Vol.30, No.3, January 2001. 
  6. 6. "Efficient and Novel Method for Surface Oxidation of Polypropylene in the Solid Phase Using Microwave Irradiation", S. E. Mallakpour, A. R. Hajipour, A. Zadhoush and A. R. Mahdavian, Journal of Applied Polymer Science, Vol.79, Pages 1317-1323,  2001.  
  7. 7. "Microwave assisted oxidation of polyethylene under solid-state conditions with potassium permanganate",S. E. Mallakpour, A. R. Hajipour, A. R. Mahdavian, A. Zadhoush and F. Ali-Hosseini, European Polymer Journal, 37(2001) 1199-1206. 
  8. 8. "The Influence of K-Value and Plasticizer Type on the Rheological Behaviour of Plastisol Used in  Coated Fabrics",A. Zadhoush, M. A. Alsharif and P. Esmailzadeh-Boukany, Iranian Polymer Journal, Vol. 13, No. 5, 371-379, Sept-Oct 2004.
  9. 9."Study of the  Dispersion Quality of Pigment in Colour Masterbatches with the use of Image Analysis", A. Zadhoush, A. Mehrabani, H. Rajabi and S. Asadi, Iranian Journal of Polymer Science and Technology. No.2, 91-98, 2004. 
  10. 10. "Relevant Production Parameters for the Colored Masterbatches and Comparison of the Internal and External Types",A. Zadhoush, A. Mehrabani, S.S. Shahidi,  International Journal of Engineering Science Vol.16, No.2, 2005, page 145-155, (IUST) Persian Language, Iran University of Science and Technology.
  11. 11. "Physico-Mechanical Properties of -Cellulose Filled Styrene-Butadiene Rubber Composites",M. Haghighat, A. Zadhoush and S. Nouri-Khorasani, Journal of Applied Polymer Science 96 (2005) 2203-2211. 
  12. 12. "Comparison of the effects of Natural Calcium Carbonate and Clarifier's Deposits on the Mechanical and Physical Properties of Polymer Vinyl Chloride Mouldings"A.Mehrabani, A. Zadhoush , M.Paykari and B.Golzari, , Journal of Shomal.  No.1, pp. 1-14, 2004.
  13. 13. "Hydrolytic degradation of Poly(ethylene terephthalate)",Seyed Saeid Hosseini, Somaye Taheri, Ali Zadhoush, Arjomand Mehrabani, Journal of Applied Polymer Science, Vol. 103, 2304-2309, 2007. 
  14. 14. "Synthesis and Optimization of Copper Sulfide-Coated Electrically Conducting Poly (acrylonitrile) Fibers",S. Baseri, A. Zadhoush, M. Morshed, M. Amirnasr, M. Azarnasab, Journal of Applied Polymer Science, Vol. 104, 2579-2586, 2007. 
  15. 15. "PET/PP Blending by Using PP-g-MA Synthesized by Solid Phase",M. Akbari, A. Zadhoush, M. Haghighat, Journal of Applied Polymer Science,Vol. 104, 3986-3993,2007. 
  16. 16. "Filler-rubber Interactions in -Cellulose Filled Styrene Butadiene Rubber Composites"M. Haghighat, S. Nouri Khorasani, A. Zadhoush,, Polym. Compos., 28:748-754, 2007. 
  17. 17. "Hydrolytic and Thermal Degradation of PET Fibers and PET Granule: The Effects of Crystallization, Temperature and Humidity",Elahe Pirzadeh, Ali Zadhoush, Mohammad Haghighat, Journal of Applied Polymer Science, Vol. 106, 1544-1549 , 2007. 
  18. 18. "Temperature Dependent Rheological Behaviour of Plastisols Used in Coated Fabrics", Ali Zadhoush, Mohammad Ali Alsharif, Mohammad Reza Moghareh-Abed, Mohammad Haghighat,Iranian Polymer Journal, Vol. 16 (11), 753-758, 2007. 
  19. 19. "Theoretical and Experiment Determination of Thensile Properties of Nanosized and Micron-sized CaCO3/PA66 Composites", M. Rastgoo Sisakht, S. Nouri-Khorasani, A. Zadhoush, M. H. Enayati and H. Pezeshki,Polym Compos.,Vol. 30, 274-280, 2009. 
  20. 20. "Effect of Orientation and Crystallinity on the Photodegradation of Poly (ethylene terephalate) Fibers",H. Fashandi, Ali Zadhoush, Mohammad Haghighat, Polymer Engineering and Science Journal, Vol. 48, 949-956, 2008. 
  21. 21. "Effect of Dy/Wet Spinning on Photooxidative Degradation of Acrylic Fibers",A. Aghanouri, Ali Zadhoush, Mohammad Haghighat, Applied Polymer Science Journal, Vol. 111, 945-952, 2009. 
  22. 22. "Influence of Yarn Texture on the Mechanical Properties of Textile Composite Castings",Ali Zadhoush, Mohammad Sheikhzadeh, Amir Elahidust, Elahe Pirzadeh, Journal of Polymer Composite, Vol. 31, 203-209, 2010. 
  23. 23. "Influence of Yarn Texture on the Mechanical Properties of Textile Composite Castings",Ali Zadhoush, Mahmoud Esmaeili, I. Ghaeli, "Crosslinking of Plasicized PVC Used in Coated Fabrics", Journal of Vinyl and Additive Technology, Vol. 15,108-112, 2009. 
  24. 24. “Experimental Investigation of the Governing Parameters in the Electrospinning of poly (3-hydroxybutyrate) Scaffolds: Structural Characteristics of the Pores”,Ashkan Heidarkhan Tehrani, Ali Zadhoush, Saeed Karbasi, Saied Nouri Khorasani Journal of Applied Polymer Science, Vol. 118, 2682-2689, 2010. 
  25. 25.“Scaffold Percolative efficiency: in vitro evaluation of the Structural Criterion for electrospun mats”, Ashkan Heidarkhan Tehrani, Ali Zadhoush, J, Mater Sci: Mater Med,Vol.  21, 2989-2998, 2010. 
  26. 26. “Investigation of the effect of SSP in Stabilizing the Structure of Condensation Polymer blends via rheological Measurements” ,Hamed Khoshnevis, Ali Zadhoush,Rheological Acta 2011.12.24. 
  27. 27. “Effet of Shape and Orientation of carbon Steel fiber on the modulus of epoxy-based composite” ,M.S.Ghoraishi, A.Zadhoush, A.A. Ghareh Aghaji, Journal of Applied Polymer Science, Vol. 121, 469-474, 2011. 
  28. 28. “Formation of nano SiC Whiskers in Bauxite-Carbon Composite Materials and their Consequences on Strength and Density",K. Karamian, A. Monshi, A. Bataille, A. Zadhoush, Journal of the European Ceramic Society,Vol. 31, 2677-2685, 2011. 
  29. 29. “Air Permeability of Electrospun Polyacrylonitrile Nanoweb”,Ramazan Ali Abuzade, Ali Zadhoush, Ali Akbar Gharehaghji, Journal of Applied Polymer Science, Vol. 126, Issue 1, 232-243, 2012.
  30. 30. “The influence of Epoxy Resin on the Morphological and Rheological Properties of PET/PA66 Blend” , Hamed Khoshnevis, Ali Zadhoush,Rheological Acta, Vol. 51,Issue 5, 467-480, 2012.
  31. 31.“Melt Spinning and Characterization of Pigmented PP fiber Nano Composites in corporating cold plasma modified organoclay”, M.A. Alsharif, A. Zadhoush, C. Jama, S.M. Mortazavi, Advances in Polymer Technology, Under Press.
  32. 32. “Influence of Aspect ratio and Filler content in nano scale on the mechanical properties of Sic/Epoxy composites” ,Mohammodreza Naeimirad, Ali Zadhoush, Rasoul Esmaeely Neisiany, Maryam Ghoraishi,, Journal of Composite Materials.
  33. 33. “Preparation and Characterization of Thermal-Responsive Poly-(Propylene) Nonwoven Grafted with N-Isopropylacrylamide/β-Cyclodextrin”, Setareh Amiri, Ali Zadhoush, S.E. Mallakpour,Journal of Industrial Textile , Vol. 43, Issue 1, 116-131, Jully 2013.
  34. 34.  “Preparation of porous nanofibers from electrospun polyacrylonitrile/calcium carbonate composite nanofibers using porogen leaching technique” ,Mona Mehraban, Ali Zadhoush, S.A.Hosseini Ravandi,R.Bagheri,Applied Polymer, Vol. 128, Issue 2, 926-933, 2012.
  35. 35.  “Mechnanical Properties of Polypropylene/Glass Weft Knitted Composites hot pressed in various structures and contents”,D.Semnani, Ali Zadhoush, M. Mashaikhi, Science and Engineering of Composite Materials, Vol. 20, Issue 1, 67-73, 2012.
  36. 36. “Investigation into Energy Absorption Capacity of Composites Reinforced by 3D Weft knitted Fabrics”,Hossein Hasani, Said Ajeli, Reza Hasami, Ali Zadhoush, Journal of Industrial Textile, 1-13, Textile 2012.
  37. 37. “Shear Modeling of Fiber Reinforced Soil Composite on the Base of Fiber Pull-out Fibers”, S.M. Hejazi, Mohamad Shikhzadeh, S.M. Abtahi, Ali Zadhoush, Fiber and Polymers Textile, Vol. 14, No. 2, 277-284 , 2013.
  38. 38. “Shear behavior of soft-matrix Composites Reinforced with Polyethylene Loop-Fomed Fibers”,S.M. Hejazi, Mohamad Shikhzadeh, S.M. Abtahi, Ali Zadhoush, Iranian Polymer Journal,Vol. 22,Issue 1, 15-24,Textile 2013.
  39. 39. "Novel superhydrophobic top coating on surface modified PVC-coated fabric",Shabnam Joneydi, Akbar Khoddami, Ali Zadhoush, Progress in Organic Coating, Vol. 76, 821-826, 2013.
  40. 40. "A simple review of soil reinforcement by using natural and synthetic fibers",Sayyed Mahdi Hejazi, Mohammad Sheikhzadeh, Sayyed Mahdi Abtahi, Ali Zadhoush, Construction and Building Materials, Vol. 30, 100-116, 2012.
  41. 41.“Investigation into Energy absorption capacity of composites reinforced by 3D- weft knitted fabrics”,Reza Hessami, Hossein Hasani, Ali Zadhoush, journal of textile technology and science, NO. 1/3, 9-14, 2012.
  42. 42.”Thermal Degradation and Flammability Properties of Polypropylene Nanocomposite Using Organoclay-graft-poly (ethylene glycol methacrylate phosphate)”, M.A. Alsharif, A. Zadhoush,2014,,Advances in Polymer Technology.
  43. 43)” The Influence of Glass Fiber Surface chemical Pretreatment on the Mechanical Properties of Single Fibre and the Composite”,S.Safi, A. Zadhoush, M.masoomi, Polymer Composites.
  44. 44)   Microfluidic behaviour in melt-spun hollow and liquid core fibers” , Mohammadreza Naeimirad, A. ZadhoushInternational Journal of Polymeric Materials and Polymeric Biomaterials,2016.
  45. 45) ) Effects of Chemical Surface Pretreatment on tensile Properties of a Single Glass Fiber and the Glass Fiber Reinforced Epoxy Composite” , Sommaye Safi, A. Zadhoush, Mohmood Masoomi,Polymer Composites. 2016.
  46. 46)“Influence of porosity and aspect ratio of nanoparticles on the interface modification of glass/epoxy composites”,H.Najafi, A. Zadhoush, Z. Talebi, Polymer Composites,2018.
  47. 47)“Investigation of the relation between viscoelastic properties of polysulfone solution phase inversion process and membrance morphology The effect of solvent power”, Mohaddese mousavi, A. Zadhoush, JOURNAL OF MEMBRANE SCIENCE,2017.
  48. 48)  " Evaluation of interfacial properties of the silane blend sized glass fiber-epoxy composite by the microdroplet test", Sommaye Safi, A. Zadhoush, JOURNAL OF COMPOSITE MATERIALS,2017.
  49. 49)" melt-spun liquid core fibers physical and morphological characteristics",Mohammadreza Naeimirad, A. Zadhoush, IRANIAN POLYMER JOURNAL,2017.
  50. 50) ) "Flexural and Charpy Impact Behavior of Epoxy/ Glass Fabric Treated by Nano-SiO2 and Silane Blend”,Sommaye Safi, A. Zadhoush , mojtaba.ahmadi , Plastics Rubber and Composites, Macromolecular Engineering.2018.
  51. 51) ”Effect of alkali treatment on mechanical properties of the green composites reinforced with milkweed fibers”,Moghgan Sayanjali Jasbi, Hossein Hasani, Ali Zadhoush and Somayeh Safi , The Journal of The Textile Institute, 2018.
  52. 52) ” A Review on Aerogel: 3D Nanoporous Structured Fillers in Polymer-Based Nanocomposites ”, S. Salimian , Ali Zadhoush , M. Naeimirad, R. Kotek, S. Ramakrishna.POLYMER COMPOSITES, 2018.
  53. 53)" تهيه و شناسايي سازه ليفي فوق آب گريز سيليكاايروژل/بازالت خشك شده در فشار محيط ",Zahra Talebi, Negar Habibi, Ali Zadhoush, 2017,پژوهشهاي كاربردي مهندسي شيمي پليمر.
  54. 54)" Melt spun liquid core fibers a CFD analysis on biphasic flow in coaxial spinneret die ", Mohammadreza Naeimirad, A. Zadhoush,FIBERS AND POLYMERS,2018.
  55. 55)" Evaluation of Surface modification impact on PP/MWCNT nanocomposites properties by rheological and mechanical characterization assisted with morphological image processing ",A. Zadhoush,Reyhaneh Reyhani,Mohammadreza Naeimirad POLYMER COMPOSITES,2018.
  56. 56)" Recent Advances in core/ shell Biocomponent Fibers and Nanifibers A Review ", Mohammadreza Naeimirad, A. Zadhoush, Kotek Richard , Rasoul.Esmaeely, Saeed Noori KHorasani, Ramakrishna seeram,  JOURNAL OF APPLIED POLYMER SCIENCE ,2018.
  57. 57)" A review on new mesostructured composite materialsPart 1.synthesis of polymer-mesoporous silica nanocomposite ",S. Salimian , Ali Zadhoush ,A. Mohammadi, JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , 2018.
  58. 58) "Tensile Properties Evaluation of Hybride Silane - Treated Glass Fabric/Epoxy",Sommaye Safi, A. Zadhoush , mojtaba.ahmadi, P. Rezazadeh Tehrani IRANIAN POLYMER JOURNAL,2018.
  59. 59) "Melt spun PLA liquid filled fibers physical morphological and thermal properties" ,Mohammadreza Naeimirad, A. Zadhoush, Rasoul.Esmaeely,S.SalimianKotek Richard , JOURNAL OF THE TEXTILE INSTITUTE ,2018.
  60. 60)" The role of interface in improving fracture toughness of shaped steel fiber0reinforced composites ",Maryam Ghoraishi,Hawk JE, M.Ghoraishi,A. Zadhoush, JOURNAL OF COMPOSITE MATERIALS ,2018.
  61. 61)" Influence of microfluidic flow rates on the propagation of nano/microcracks in liquid core and hollow fiber",Mohammadreza Naeimirad, A. Zadhoush, Rasoul.Esmaeely,R. krishna, S.Salimian,Leal Andres, THEORETICAL AND APPLIED  FRACTURE MECHANICS ,2018.
  62. 62)"A  review on new mesostructured composite materialsPart ll.Characterization and properties of polymer - mesoporous silica  ", S. Salimian , Ali Zadhoush ,A. Mohammadi,JOURNAL OF REINFORCED  PLASTICS AND COMPOSITES, 2018.
  63. GHORAISHI KAHNGI M., HAWK J., GHORAISHI M., ZADHOSH A., "The role of interface in improving fracture toughness of shaped steel fiber0reinforced composites", JOURNAL OF COMPOSITE MATERIALS, PP. 1_7, 2018.
  64. KHOSHNEVIS H., MYO MINT S., YEDINAK E., TRAN T., ZADHOSH A., YOUSSEFI M., PASQUALI M., DUONG H., "Super high-rate fabrication of high-purity carbon nanotube aerogels from floating catalyst method for oil spill cleaning", CHEMICAL PHYSICS LETTERS, Vol. 693, PP. 146_151, 2018.
  65. KHOSHNEVIS H., THANG Q ., SANDAR MYO M., ZADHOSH A., HAI M. D., YOUSSEFI M., "Effect of alignment and packing density on the stress relaxation process of carbon nanotube fibers spun from floating catalyst chemical vapor deposition method", COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, No. 558, PP. 570_578, 2018.
  66. NAEIMIRAD M., ZADHOSH A., ESMAEELY NEISIANY R., SALIMIAN S., KOTEK R., "Melt spun PLA liquid0filled fibers physical morphological and thermal properties", JOURNAL OF THE TEXTILE INSTITUTE, PP. 1_12, 2018.
  67. NAEIMIRAD M., ZADHOSH A., "Melt spun liquid core fibers a CFD analysis on biphasic flow in coaxial spinneret die", FIBERS AND POLYMERS , 2018.
  68. NAEIMIRAD M., ZADHOSH A., ESMAEELY NEISIANY R., RAMAKRISHNA S., SALIMIAN S., LEAL A., "Influence of microfluidic flow rates on the propagation of nano/microcracks in liquid core and hollow fibers", THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 96, PP. 83_89, 2018.
  69. NAEIMIRAD M., ZADHOSH A., KOTEK R., ESMAEELY NEISIANY R., NOURI-KHORASANI S.,
  70. RAMAKRISHNA S., "Recent Advances in core/ shell Biocomponent Fibers and Nanifibers A Review", JOURNAL OF APPLIED POLYMER SCIENCE, PP. 1_65, 2018.
  71. SAFI S.-., ZADHOSH A., AHMADI M., REZAZADEH TEHRANI S., "Hybrid silane-treated glass fabric/ epoxy composites tensile properties by micromechanical approach", Iranian Polymer Journal, Vol. 27, No. 1, PP. 1_11, 2018.
  72. SALIMIAN S., MALFAIT W., ZADHOSH A., TALEBI MAZRAEHSHAHI Z., NAEIMIRAD M., "Fabrication and evaluation of silica aerogel-epoxy nanocomposites Fracture and toughening mechanisms", THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 97, PP. 156_164, 2018.
  73. ALIBAKHSHI S., YOUSSEFI M., HOSSEINI S., ZADHOSH A., "Tuning morphology and transport in ultrafiltration membranes derived from polyethersulfone through exploration of dope formulation and characteristics", Materials Research Express, Vol. 6, PP. 1_14, 2019.
  74. SALIMIAN S., ZADHOSH A., "Water-glass based silica aerogel: unique nanostructured filler for epoxy
  75. nanocomposites", JOURNAL OF POROUS MATERIALS , 2019.
  76. SALIMIAN S., ZADHOSH A., TALEBI MAZRAEHSHAHI Z., "Interpenetrating Organic-Inorganic Network: a Short Review on Aerogel as a Nanoporous Filler in Epoxy Nanocomposite", Material Design @ Processing Communications , 2019.
  77. BORHANI S., ZADHOSH A., FATHI SAKI M., "Mechanical Properties of Transparent Poly (methyl methacrylate) Nanocomposites Reinforced with Core-Shell Polyacrylonitrile / Poly (methyl", JOURNAL OF APPLIED POLYMER SCIENCE, PP. 1_11, 2020.
  78. MIRMOHAMMAD SADEGHI S., BORHANI S., ZADHOSH A., DINARI M., "Single nozzle electrospinning of encapsulated epoxy and mercaptan in PAN for self-healing application", POLYMER, No. 186 , 2020.
  79. ALIBAKHSHI S., YOUSSEFI M., HOSSEINI S., ZADHOSH A., "Significance of thermodynamics and rheological characteristics of dope solutions on the morphological evolution of polyethersulfone ultrafiltration membranes", POLYMER ENGINEERING AND SCIENCE, Vol. 61, No. 3, PP. 742_753, 2021.
  80. ASOODEH F., AGHVAMI-PANAH M., SALIMIAN S., NAEIMIRAD M., KHOSHNEVIS H., ADHOSH A., "The Effect of Fibers' Length Distribution and Concentration on Rheological and Mechanical Properties of Glass Fiber Reinforced Polypropylene Composite", Journal of Industrial Textiles, PP. 1_20, 2021.
  81. MIRMOHAMMAD SADEGHI S., BORHANI S., ZADHOSH A., DINARI M., "Self-healing performance of hybrid core-shell nanofibers mat containing epoxy-mercaptan at subroom temperature", POLYMER COMPOSITES , 2021.
  82. REYHANI R., ZADHOSH A., SALMAN TABRIZI N., NAZOCKDAST H., NAEIMIRAD M., "Fractural performance of epoxy nanocomposites reinforced with carbon aerogels in different structures", THEORETICAL AND APPLIED FRACTURE MECHANICS, PP. 103079, 2021.
  83. REYHANI R., ZADHOSH A., SALMAN TABRIZI N., NAZOCKDAST H., NAEIMIRAD M., "The influence of CNT-doped carbon aerogels on microstructural, rheological and mechanical properties of epoxy nanocomposites", COMPOSITES SCIENCE AND TECHNOLOGY, Vol. 215, No. 9, PP. 109031, 2021.
  84. REYHANI R., ZADHOSH A., TABRIZI N., NAZOCKDAST H., NAEIMIRAD M., "Synthesis and characterization of powdered CNT-doped carbon aerogels", JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 571, PP. 121058-1_121058-9, 2021.

ارتقاء امنیت وب با وف ایرانی